Pump Discharge Inline Filter – 2″ BSP

Recycle rainwater to use with domestic appliances. The Pump Discharge Inline Filter allows you to use rainwater with either your washing machine, toilet or for pressure washing cars or patios.

The standard filtration is 300 micron, however higher degrees of filtration are available to 22 micron. With the finer filtration attention should be paid to the flow capacity of the filter and the regularity of cleaning which would be acceptable.

The use of the filter on the discharge side of the pump is always good practice, especially when using the water in a pressure washer and when washing cars.

 

Technical Specifications:

Polypropylene Filter

Closing system: with threaded cover

Max. pressure: 8 bar at 20 degrees celsius

Nominal flow rate: 5 m3/ h

Filtering cartridge: stainless steel mesh, polyester mesh (100 cm2)

Cartridge diameter: 37 mm

Cartridge length: 129 mm

Connections: 2″ bsp

Other products also available with the following connections: 1″ bsp and 1.5″ bsp